프로그램이나 폴더를 선택후...키보드에서 커맨드+옵션키를 누른채로 데스크탑으로 드래그하면 자동으로 바로가기가 만들어집니다.
'Mac OS' 카테고리의 다른 글
맥북 하드디스크 SSD교체후 인식안 될 때 (0) | 2013.04.28 |
---|---|
[펌] Clicking a button with your spacebar (2) | 2012.12.06 |
맥북에서 나의 설정들 (0) | 2012.06.26 |
프로그램이나 폴더를 선택후...키보드에서 커맨드+옵션키를 누른채로 데스크탑으로 드래그하면 자동으로 바로가기가 만들어집니다.
맥북 하드디스크 SSD교체후 인식안 될 때 (0) | 2013.04.28 |
---|---|
[펌] Clicking a button with your spacebar (2) | 2012.12.06 |
맥북에서 나의 설정들 (0) | 2012.06.26 |
새 SSD를 장착했는데,
부팅시 옵션키 눌러도 SSD가 보이지 않을 때의 조치 방법:
1. OSX 설치 DVD로 부팅한후
2. 아래 메뉴의 유틸리티 - 디스크 관리자 선택
3. 아래그림처럼 SSD가 보이면 지우기를 하면 됨
(아래그림은 SSD에 있는 것은 아니고, 유사한 그림임)
Mac 에서 바로가기 아이콘 만들기 (0) | 2013.04.30 |
---|---|
[펌] Clicking a button with your spacebar (2) | 2012.12.06 |
맥북에서 나의 설정들 (0) | 2012.06.26 |
출처: http://www.macsinlaw.com/click-a-button-with-your-spacebar/
February 14, 2011Mac Tips 4 Comments
It’s the little things that can make a big difference. When a dialog box pops up asking me to click a button (such as Cancel, Ok, Save, etc.) I hate having to take my hands OFF the keyboard, move over to the mouse or trackpad, move the cursor to the right place, and then finally click the button.
I know, it’s a small thing, but even just taking that 1 or 2 seconds to perform that action gets annoying if you have to do it 40 or 50 times a day.
In the Windows world, you can use the Tab key to circulate through the different buttons, and when the right one is highlighted, you can hit the Enter key to “select” or “click” the button.
It really annoyed me that this wasn’t a default in Mac OS X, but I was happy to find a fix hidden in the Keyboard Shortcut Pref Pane.
Go to Systems Preferences > Keyboard > and select the Keyboard Shortcuts tab. Down at the bottom under “Full Keyboard Access” you select “All controls.”
Once you make that change, you can now use the Tab key to switch the “focus” to another button in the dialog box. The main difference from the Windows world is that you don’t use the Enter/Return key to “click” the button – that will “click” whatever default selection has been programmed into the dialog box, which is usually in the blue color.
Instead, the button with the “focus” will be ENCIRCLED in a blue color, and you’ll need to hit the SPACEBAR to actually “click” that button.
So in the example above, the “Save” button is the default selection, and hitting Enter/Return will automatically “click” that button, even without the use of the Tab key.
The “Don’t Save” button is encircled in blue, and I could use the Tab key to place the “focus” on “Cancel.”
If I hit the spacebar now, I will click the “Don’t Save” button. Or I could hit Tab to shift the focus to “Cance” and then hit the spacebar to click “Cancel.”
I haven’t found this to cause any problems or conflicts with anything else in Mac OS X, and I think it’s a great setting to change to shave off those extra seconds during the day. You will use this more than you think!!
맥북 하드디스크 SSD교체후 인식안 될 때 (0) | 2013.04.28 |
---|---|
맥북에서 나의 설정들 (0) | 2012.06.26 |
[펌] 맥에서 쉬프트 스페이스로 한영전환 총정리 (0) | 2012.06.26 |
손가락 2개 터치로 마우스 우클릭 되도록.
화면보호기 빠져나올때 암호 입력하도록:
[펌] Clicking a button with your spacebar (2) | 2012.12.06 |
---|---|
[펌] 맥에서 쉬프트 스페이스로 한영전환 총정리 (0) | 2012.06.26 |
[펌] 시스템폰트 애플고딕 - 나눔고딕 변경하는 방법 (0) | 2012.06.26 |
from: http://jiyoon.unfix.net/2011/07/31/mac-os-x-10-7-lion%EC%97%90%EC%84%9C-shift-space%EB%A1%9C-%ED%95%9C%EC%98%81-%EC%A0%84%ED%99%98%ED%95%98%EA%B8%B0/
Mac OS X 10.7에서 Shift-Space로 한영 전환하는 방법은 10.6과 같다. 하지만 Keyboard Shortcuts에서 기존 방법대로 Shift-Space를 Select the previous input source에 전환 키를 지정하면 화면 가운데에 Input source indicator가 표시되면서 전환 과정에 지연시간이 발생하므로, 한영 전환 키를 Select next source in Input menu에 지정하여 Indicator가 표시되지 않도록 하여 전환 지연시간이 없도록 변경한다.
값을 바꾸어줄 com.apple.symbolichotkeys.plist 파일의 위치는 아래와 같으며, App Store에서 미리 Xcode를 내려받아서 설치해야만 편집이 가능하다.
~/Library/Preferences/
또는 시스템 전체 사용자에게 적용하려면 다음의 경로에서 plist 파일을 수정한다.
/Library/Preferences/
Shift-Space 키를 Select next source in Input menu 항목에 입력하는 것 처럼 다음 위치에서 Command-Option의 키 코드이자 기본값으로 지정된 1572864을 Shift의 키 코드인 131072으로 수정한다.
AppleSymbolicHotKeys > 61 > value > parameters > item 2
Option-Shift-Space 키를 Select the previous input source 항목에 지정하려면 다음 위치에서 Command 키의 코드인 1048576을 Option-Shift 키의 값인 655360으로 수정한다.
AppleSymbolicHotKeys > 60 > value > parameters > item 2
========================================
현재 내가 사용중 //2012.6.26
(PlistEditPro.dmg 를 임시실행하여, 값 변경했음)
from: http://jiyoon.unfix.net/2011/02/15/snow-leopard%EC%97%90%EC%84%9C-shift-space%EB%A1%9C-%ED%95%9C%EC%98%81-%EC%A0%84%ED%99%98%ED%95%98%EA%B8%B0/
Mac OS X 10.6 에서 Shift-Space 키로 한영 전환을 하려면
~/Library/Preferences/
경로의 com.apple.symbolichotkeys.plist 파일을 열고
AppleSymbolicHotKeys > 60
> value > parameters > item 2 항목에서
기본값으로 설정되어 있는 Command 키 값인
1048576을 Shift 키 값인 131072으로 변경하고 저장한 다음
재시동한다.
========================================
from:http://dobiho.com/?p=691
<p>Your browser does not support i.</p>
도스때 도깨비 한글로 한글을 사용할 때 부터 한영전환을 쉬프트+스페이스키를 사용해서 지금까지 사용하고 있습니다. 한글 윈도우즈는 한영키가 따로 있지만 윈도우즈에서 한영변환을 쉬프트+스페이스키로 변경할 수 있습니다.
맥은 디폴트가 코멘트(사과키)+스페이스 키입니다. 따라서 맥으로 전환해서 첫번째 찾은 것은 바로 한영 전환 키 지정이었습니다.
맥에서도 한영전환키를 쉬프트+스페이스 키로 지정할 수 있습니다. 애플포럼의 [tiger/타이거/OS10.4]한영전환(언어전환) shift+space로 하기 에 잘 나와 있습니다. 이를 제가 살짝 정리했습니다.
다음과 같이 plist 파일을 수정하면 됩니다.
OS X 10.4(타이거) 에서 한영전환을 쉬프트+스페이스 키로 지정하기
1. PlistEdit Pro 를 다운로드해서 설치 한다.
2. ~사용자/Library/Preferences/com.apple.universalaccess.plist 를 더블클릭한다.
3. Root/UserAssignalbeHotkeys/27번을 열어서 modifier를 131072 로 변경한다.
4. 재부팅을 하면 변경이 된다
OS X 10.5(레오파드) 에서 한영전환을 쉬프트+스페이스 키로 지정하기
1. PlistEdit Pro 를 다운로드해서 설치 한다.
2. ~사용자/Library/Preferences/com.apple.symbolichotkeys.plist 를 찾아서 더블클릭 한다.
레오파드에서는 키보드를 지정하는 plist 파일이 변경되었습니다.
3. Root/AppleSymbolicHotkeys/60/value/parameters/2 의 값을 Number 를 131072 로 바꿔준다.
4. 재부팅을 하면 변경이 된다
커멘트+스페이스로 원복하려면
위의 변경한 부분에 이전의 값인 1048576 를 저장하고 리부팅 하면 됩니다.
패러렐즈에서 한영키 지정
맥에서 한영전환을 쉬프트+스페이스 키로 하면 페러렐즈의 XP의 키보드를 타입3로 해도 패러렐즈에서 쉬프트+스페이스키로 한영변환이 안됩니다.
타이거에서 패러렐즈의 경우에는 그림과 같이 시스템 환경설정 > 손쉬운 사용 > 보조 장비 사용”을 켜면 됩니다. 그러면 쉬프트+스페이스키로 맥과 패럴렐즈 둘다 사용할 수 있습니다
레오파드에서 페러젤즈에서는 아직 위의 방법이 안됩니다.
대신 저는 macbook_xp.exe 를 패러렐즈의 윈도우즈 XP에서 실행해서 왼쪽 사과키에 한영변환을 지정해서 사용하고 있습니다.
레오파드를 사용하는 맥에서 쉬프트+스페이스키를 사용할 경우, 페러렐즈에서 같은 키보드 조합으로 한영변환을 하는 방법은 아직 찾지 못했습니다. 혹시 아시는 분 있으면 댓글 부탁드립니다.
맥북에서 나의 설정들 (0) | 2012.06.26 |
---|---|
[펌] 시스템폰트 애플고딕 - 나눔고딕 변경하는 방법 (0) | 2012.06.26 |
[펌] Upgrading the MacBook Pro Hard Drive/ 맥북프로 하드드라이브 교체 업그레이드 (1) | 2012.06.22 |
from:http://mac.dnavi.info/329
출처 : http://mcchae.egloos.com/10616003
[펌] 맥에서 쉬프트 스페이스로 한영전환 총정리 (0) | 2012.06.26 |
---|---|
[펌] Upgrading the MacBook Pro Hard Drive/ 맥북프로 하드드라이브 교체 업그레이드 (1) | 2012.06.22 |
나의 Expose 사용법 (0) | 2012.03.14 |
출처: http://www.woosoki.com/blog/?p=215
부트캠프나, 패럴렐즈로 2개의 운영체재를 사용하게 되면서 100GB의 하드 용량이 부족함을 느낀다. 기회가 되면 하드 업그레이드를 해볼까 생각 중이다. (Translation and comment: Woo Sok Jang/ 한글 번역및 설명: 장우석 )
참고로 이 작업은 정말 신중하게 결정할 문제 입니다. 또한 이로인해 발생한 책임에 관해서는 본인의 책임임을 기억해 주세요.
1.Torx Screwdriver : Torx screwdrivers have star-shaped heads, and are available at almost any hardware store. You need a very small T-6 size. However, if it is not available, you can use longrose nipper instead of torx screwdriver / Trox 스크류 드라이버는 별 모양의 머리를 가지고 있고 대부분의 hardware store(우리나라로 치면 전자제품이나 각종 기기파는 가게를 말합니다. 미국에 계신분들은 레디오샥이라는 체인에서 구매하시면 됩니다.)에서 구매가 가능 하다. 그중에서도 매우 작은 T-6사이즈를 준비하자. (별모양과 십자모양 2가지가 필요합니다.) 하지만, 정 구입이 힘드신 분들은 주둥이가 길게나온 롱로우즈 플라이어를 사용하셔도 가능은 합니다.
2.Removing the Battery: Just push on the two tabs and the battery pops right out./ 랩탑 하단에 보이는빨래판 모양의 텍스츄어를 가진 2개의 버튼을 동시에 밀어서 베터리를 바로 분리 합니다.
3.Opening the RAM compartment: Remove three Phillips screws to open the RAM compartment./ 램이 위치한 곳을 열기 위해서 3개의 Phillips 스크류들을 분리 합니다.
4.Removing RAM : You don’t need to remove the RAM to replace the hard drive, but we should do it to be on the safe side./ 커 버 분리후 사, 하드 드라이브 교체를 위해서 램을제거할 필요는 없습니다. 하지만 안전한 곳에 다가 두고 작업 할 필요가 있습니다. 제 생각에는 일단 제거를 하시고 하는게 안전할것 같습니다. 이유는 랩탑을 돌리고 누르고 하면서 램이 밀리거나 접촉부분에 단락 현상이 혹시 생길수도 있기 때문입니다.
5.Removing Bottom Screws : Remove these Torx and Phillips screws./ 아래 사진에 보이는 스크류들을 모조리 제거해 줍니다. 항상 스크류를 제거 할때는 마모가(야마가 난다고 하지요^^) 생기지 않도록 조심하셔야 합니다.
주의:지금부터 스크류를 분리 합니다. 꼭 그림의 순서대로 하셔야 문제가 없습니다. 순서를 지켜주세요 마음대로 보이는 스크류를 분리 하시면 차후 발생되는 문제는 책임 지지 않습니다.
6.Inside front edge of battery compartment : Remove two screws from the inside front edge of the battery compartment./ 랩탑을 살짝 돌려서 베터리 칸 내부에 모서리를 보시면 안쪽에 2개의 스크류가 있습니다. 제거해 주세요
7.Eight Screws on the Sides : Next, remove four screws from the left side of your MacBook Pro, and four from the right./ 다음은 랩탑 왼쪽에 4개 그리고 오른쪽 에 4개의 스크류를 순서대로 분리 합니다.
8.Back Hinge Screws : Removing these two back screws next to the hinge is the last step before you dive inside your MacBook Pro./ 이제 마지막 스크류 입니다. 이 스크류는 꼭 맥북프로 내부를 보기전 마지막으로 분리 하셔야 합니다. 마지막 스크류들은 랩탑 뒷면 힌지(연결부분) 바로 옆에 있습니다.
9.Opening up your notebook : The best way to open up your MacBook Pro is from the back to the front. /드디어 역사적인 맥북프로의 해부 시간 입니다. 되도록이면 맥북 프로의 모니터 부분부터 마우스 패드 있는 쪽으로 들어서 열기를 부탁 드립니다.
10.Inside the MacBook Pro : The guts of your MacBook Pro, laid bare for the world to see./ 드디어 맥북 프로의 내부 입니다. 완전히 노출되어버린 맥북 프로의 세계를 경험하고 계십니다. 사실 참 단순해 보이는데 이런 녀석들이 나의 작업을 돕고 있었구나 생각하면 기분이 야릇 합니다.
11.Ribbon Cable : Mind this Ribbon Cable./리본 케이블 입니다. 보기에도 상당히 민감해 보이듯 조심조심 다루시길 바랍니다.
12.Ribbon Cable : Notice how the underside of the ribbon cable has a little keyed block? Make sure you put it back on snugly when you put your notebook back together./ 나중에 다시 조립을 하실때 아래 그림과 같이 리본케이블 하단은 작고 복잡한 선들이 있다는걸 인지 하시고 아주 조심스럽게 다루셔야 한다는것을 꼭 기억 하세요.
13.Bluetooth Module : The Bluetooth Module blocks our access to some screws � just lift it up out of the way. / 하드 드라이브를 분리 하기 위해 스크류를 빼내려고 합니다. 그런데 아래 그림에 보이는 투명한 장치가 불편하게 만듭니다. 블루투스 모듈 입니다. 그냥 살짝 들어서 스크류를 찾으세요 블루투스 모듈에 연결되 선들이 접히거나 꺽이지 않도록 주의 하세요.
14.Hard Drive Screws: Remove two screws on the right side of the hard drive./ 하드 드라이브 오른편에 2개의 스크류를 제거 합니다.
15.Pry off this connector : Gently pry off the ribbon stuck to the top of the hard drive./ 하드 드라이브 상단에 연결부를 지렛대를 들듯이 아주 조심스럽게 드러냅니다.
16.SATA connection cable : Leave this SATA connection cable attached to the motherboard. No need to remove it./ 사진에 보이는 마더보드에 연결된 SATA 연결 케이블은 구지 분리 하실 필요가 없습니다.
17.SATA plugs : Remove the SATA power and data plugs./ SATA Power과 DATA블러그를 제거 합니다. 조심조심. 캐이블을 제거한후. 하드 드라이브를 살살 들어냅니다. 이때 고무받침으로 되어있는 이음부분때문에 약간 뻑뻑하게 하드가 제거 될수 있습니다. 나사를 더이상 풀 필요가 없습니다. 괜히 다른 부분을 건들이지 마시고 일자 스크류 드라이버를 가지고 4군데 받침을 살짝씩 밀어 주면서 하드를 드러냅니다.( 주의를 요합니다)
18. Side of the hard drive : The side of the hard drive has four little plastic nubs to hold it in place./ 하드 드라이브 옆쪽에는 위치 고정을 위한 4개의 작은 플라스틱 (고무) 조각이 있습니다. 이 부분도 분리 해서 교체 하려는 하드 드라이브에 바꾸어 끼웁니다. 그리고 지금까지 한 작업을 반대로 해줍니다.
19.OS X Installer : Boot your MacBook Pro with the OS X disc in the drive to start the OS X installer./ 하드 드라이브 교체후 조립을 완전히 하신후 OS를 설치 합니다.
20.Disk Utility : Before your Mac will recognize your drive to install OS X, you need to format the disk function of the Disk Utility./드라이브는 포멧을 설치전에 하시는게 좋겠습니다.
21. Good Luck!/ 행운을 빕니다. 넉넉하게 바뀐 새로운맥프로를 경험해 보세요^^
Powered by http://www.extremetech.com Powered by woosoki.com
*출처및 원본 수정을 불허 합니다.
Trouble shooting
마지막으로 몇가지 꼭 주의 하셔야 할 부분을 언급해 보겠습니다.
만약 순서대로 모든것을 다 조립했는데 부팅이 안된다면 일단 당황하지 마시고, 두가지를 확인해 보세요
1.램을 꼭 확인해 보세요. 본인은 램을 정확히 잘 끼웠다고 생각하지만 40~50%의 부팅불량의 이유는
램에 있었습니다. 하드 드라이브나, 그외의 부분보다 램을 다시 뺐다가 정확히 딱!소리가 날때까지 정확히 꼽아 넣는것 꼭
기억하세요! 저도 실제로 하드 드라이브 교체시 부팅이 되질 않아서 정말 당황했습니다. 하지만 문제는 램을 정확히 꼽지 않은것
이었습니다.
2. 하드 드라이브 연결단자및, 케이블 확인 입니다.
거의 그럴일이 없겠지만 혹시 이부분도 문제의 이유가 될수 있습니다.
마지막으로 스크류에 관해서 말씀 드릴까 합니다. 정말 가능하다면 꼭, 스크류 드라이버는 뺀 그자리에 정확히 다시 꼽으시길 바랍니다. 이유는 맥북의 본체는 플라스틱 제품처럼 유동성이 많지 않습니다. 그렇기 때문에 처음 조립때 만들어진 나사선이 비틀어 지기 시작하면 4개의 똑같은 스크류지만 그 위치가 뒤바뀌면서 마지막 스크류가 끝까지 들어가지 않는 경우가 종종 발생 합니다. 번호를 적든지, 정확한 위치와 순서대로 똑같은 스크류라도 정확한 위치에 그대로 재조립 하시길 바랍니다. 그럼 화이팅!
If my posting is helpful for Upgrading, Please leave a short comment or something. Thanks!
[펌] 시스템폰트 애플고딕 - 나눔고딕 변경하는 방법 (0) | 2012.06.26 |
---|---|
나의 Expose 사용법 (0) | 2012.03.14 |
나의 Spotlight 사용법 (0) | 2012.03.14 |
[펌] Upgrading the MacBook Pro Hard Drive/ 맥북프로 하드드라이브 교체 업그레이드 (1) | 2012.06.22 |
---|---|
나의 Spotlight 사용법 (0) | 2012.03.14 |
맥 터미널 명령어 (0) | 2012.03.12 |
나의 Expose 사용법 (0) | 2012.03.14 |
---|---|
맥 터미널 명령어 (0) | 2012.03.12 |
[맥]용 무료 화면캡쳐 프로그램 추천 (0) | 2012.02.28 |
나의 Spotlight 사용법 (0) | 2012.03.14 |
---|---|
[맥]용 무료 화면캡쳐 프로그램 추천 (0) | 2012.02.28 |
맥에서 화면캡처하기 (0) | 2012.02.28 |
윈 도우에서 Print Screen키 또는 Alt+Print Screen 키를 눌러 화면을 캡쳐(스크린샷)할 수 있는 것처럼, 맥에서도 Command+Shict+3(전체화면), Command+Shift+4(선택영역) 또는 Command+Shift+4 를 누른 다음 ‘스페이스바’로 창을 선택하여 화면을 캡쳐할 수 있습니다.
하지만, 맥의 기본 화면캡쳐 프로그램으로는 캡쳐한 화면에 화살표를 더한 다든지 텍스트를 추가 한다든지의 기능은 없습니다. 이를 위해서는 스크린 샷을 뜬 후 다는 그래픽 프로그램으로 열어서 추가 작업을 해야 합니다.
따라서, 화면 캡쳐를 필요로 하는 맥 사용자는 기본으로 내장된 화면캡처 대신 전문 화면캡처 프로그램이 필요합니다.
두가지 화면캡쳐 프로그램을 추천합니다.
아래의 두 프로그램 모두 웹 2.0 스타일의 프로그램입니다. 즉, 스크린 샷을 뜨고 이에 간단한 텍스트를 추가한다든지 한 후, 공유하거나 지인에게 이메일로 보내기 쉽게 해 줍니다. 물론, 개인적으로 하드디스크에 저장 할 수도 있고요.
맥 터미널 명령어 (0) | 2012.03.12 |
---|---|
맥에서 화면캡처하기 (0) | 2012.02.28 |
BullZip Merge PDF (0) | 2012.02.28 |
- 맥에는 캡쳐프로그렘 '화면 캡쳐'가 유틸리티로 제공된다. -
[맥]용 무료 화면캡쳐 프로그램 추천 (0) | 2012.02.28 |
---|---|
BullZip Merge PDF (0) | 2012.02.28 |
iRAPP 클라이언트 for Windows (0) | 2011.11.01 |
맥에서 화면캡처하기 (0) | 2012.02.28 |
---|---|
iRAPP 클라이언트 for Windows (0) | 2011.11.01 |
[펌] Keyboard Shortcuts for Mac OS X Firefox (0) | 2011.09.30 |
BullZip Merge PDF (0) | 2012.02.28 |
---|---|
[펌] Keyboard Shortcuts for Mac OS X Firefox (0) | 2011.09.30 |
VMWare Fusion으로 윈도우 설치후 설정할 것들 (0) | 2011.08.28 |
iRAPP 클라이언트 for Windows (0) | 2011.11.01 |
---|---|
VMWare Fusion으로 윈도우 설치후 설정할 것들 (0) | 2011.08.28 |
BootCamp에서 PrintScreen 키는 fn+shift+F11. (0) | 2011.04.26 |
[펌] Keyboard Shortcuts for Mac OS X Firefox (0) | 2011.09.30 |
---|---|
BootCamp에서 PrintScreen 키는 fn+shift+F11. (0) | 2011.04.26 |
Mac OS X에서 Logitech MX 5500 Revolution mouse 설정법(Bluetooth 동글 없이) (1) | 2010.09.25 |
VMWare Fusion으로 윈도우 설치후 설정할 것들 (0) | 2011.08.28 |
---|---|
Mac OS X에서 Logitech MX 5500 Revolution mouse 설정법(Bluetooth 동글 없이) (1) | 2010.09.25 |
[펌] 맥에서 화면캡쳐 저장위치 변경방법- How to Set a Folder to Save Screen Shots on Mac (0) | 2010.09.25 |
BootCamp에서 PrintScreen 키는 fn+shift+F11. (0) | 2011.04.26 |
---|---|
[펌] 맥에서 화면캡쳐 저장위치 변경방법- How to Set a Folder to Save Screen Shots on Mac (0) | 2010.09.25 |
[펌] 맥에서 화면 캡쳐 방법- How to Take Screen Shots on Mac with Keyboard Short Keys (0) | 2010.09.25 |
Whenever you take the screen shots on Mac it directly save those on desktop. This would be better if you specify a folder on Mac to automatically save the screen shots because in that way it’ll be easy to organize them. So, if you want to change the default storage location, which is the desktop on Mac for screen shots then follow these steps to do so.
See also: How to capture screen shots on Mac
Click on Finder
Navigate to Utilities folder and click on Terminal icon to launch it
Type the following command in Terminal and press enter button to execute. You have to specify username and foldername in command according to your Mac settings and most importantly do not use space in folder name otherwise command will not provide the required results
defaults write com.apple.screencapture location /Users/username/desktop/foldername
where: mac09 = mac user name & twscreenshots = specified folder on desktop
Now, type and execute another command in Terminal
killall SystemUIServer
Close the Terminal window, the default location to save the screen shots has been replaced by the new specified folder
To take a screen shot on Mac is not a difficult task, you just have to remember some keyboard shortcut keys and create quick screen shots according to your requirement. Here we share some methods to take screen shots on Mac.
Use following commands to take screen shots according to your requirement. Mac will store your screen shots on desktop
Command + Shift + 3
Takes full screen picture
Command + Shift + 4
Your mouse pointer will converted to a different icon, use this to specify a region of screen
Command + Shift + 4, and then press Space bar
And click on specific element of screen as a window, Dock, menu, icon etc….It’ll capture that specific element screen shot
By using following commands, you can save your captured screen shot on clipboard and then paste them in any other image editing program.
Command + Control + Shift + 3
Takes full screen picture and saves on clipboard
Command + Control + Shift + 4
Your mouse pointer will converted to a different icon, use this to
specify a region of screen and it saves that screen shot on clipboard
Command + Control + Shift + 4, and then press Space bar
And click on specific element of screen as a window, Dock, menu, icon
etc….It’ll capture that element’s screen shot and saves on clipboard
[펌] 맥에서 화면캡쳐 저장위치 변경방법- How to Set a Folder to Save Screen Shots on Mac (0) | 2010.09.25 |
---|---|
[링크] VMWare player 3.1.1에서 OS X 10.6 Snow Leopard 설치(Windows XP) (0) | 2010.09.13 |
[펌] VMware 를 이용한 MAC OS X 설치(snow leopard) (0) | 2010.09.13 |